Bleed Cooling System In 1997 Honda Odyssey. Bleed Air Cooling System 5) Install spill free funnel (KEY POINT; See above for explanation) 6) Open bleed valve 7) Fill radiator until coolant constantly flows out of the bleed valve Get all the air bubbles and airlocks out of your car's cooling system can be difficult
Honda Odyssey One Cooling Fan Works On High / Both Work On Low? YouTube from www.youtube.com
Every 30,000 miles it's a good idea to do a flush of the cooling system to make sure your engine maintains optimal cooling efficiency Top off the cooling system and overflow reservoir with a 50/50 mixture of a recommended antifreeze and water solution, and bleed the system to remove any air pockets as necessary.
Honda Odyssey One Cooling Fan Works On High / Both Work On Low? YouTube
I started this process of bleeding the air out of the rad but got "cold feet" (pun intended - it's cold this week!) when I started seeing the coolant overflowing out of the fill cap as the engine started warming up. If you've recently opened the cooling system to replace a part or change out the coolant, verify that you have no coolant leaks Coolant bleeding using a funnel, I know all about the Lisle 24610 spill free funnel it is very nice but I lost mine (don't ask)
Bleeding Air In Cooling System YouTube. 9) Close spill free funnel and remove from radiator 10) Install radiator cap (make sure it is good and sealed!) Loosen the air bleed bolt in the thermostat housing, then fill the radiator to the filler neck with the coolant mixture
Bleed Air Cooling System. Tighten the bleed bolt as soon as coolant starts to run out in a steady stream without bubbles. Then, bleed the system for any air that might be trapped